F2603 CDMA2000 1X EVDO IP MODEM TECHNICAL SPECIFICATION
|
F2603 CDMA2000
1X EVDO IP MODEM TECHNICAL SPECIFICATION
|
General
|
|
F2603
CDMA2000 1X EVDO IP MODEM is a kind of cellular terminal device that provides
data transfer function by public EVDO network.
It adopts high-powered industrial 16/32 bits CPU and embedded real
time operating system. It supports RS232 and RS485 (or RS422) port that can
conveniently and transparently connect one device to a cellular network,
allowing you to connect to your existing serial devices with only basic
configuration.
It has been widely used on M2M fields, such as intelligent
transportation, smart grid, industrial automation, telemetry,
finance, POS, water supply, environment protection, post, weather, and
so on..
|
Product Feature
------------------------------------------------------------------------------------------------------------------------------
Design for Industrial Application
u High-powered industrial cellular module
u High-powered industrial 16/32 bits CPU
u Support low-consumption mode, including sleep mode, scheduled
online/offline mode, scheduled power-on/power-off mode(optional)
u Housing: iron, providing IP30 protection.
u Power range: DC 5~35V
Stability and
Reliability
u Support hardware and software WDT
u Support auto recovery mechanism, including online detect, auto
redial when offline to make it always online
u RS232/RS485/RS422 port: 15KV ESD protection
u SIM/UIM port: 15KV ESD protection
u Power port: reverse-voltage and overvoltage protection
u Antenna port: lightning protection(optional)
Standard and Convenience
u Support standard RS232 and RS485(or RS422) port that can connect to
serial devices directly
u Support intellectual mode, enter into communication state
automatically when powered
u Provide management software for remote management
u Support several work modes
u Convenient configuration and maintenance interface
High-performance
u Support TCP server and support multi TCP client connection(optional)
u Support double data centers, one main and another backup
u Support multi data centers and it can support 5 data centers at the
same time
u Support multi online trigger ways, including SMS, ring and data.
Support link disconnection when timeout
u Support dynamic domain name(DDNS) and IP access to data center
u Design with standard TCP/IP protocol stack
u Support APN/VPDN
Product Specification
-----------------------------------------------------------------------------------------------------------------
Cellular
Specification
|
Item
|
Content
|
|
Cellular Module
|
Industrial cellular module
|
|
Standard and Band
|
CDMA2000 1X EVDO Rev A 800MHz,800/1900MHz(optional),
450MHz (optional)
CDMA2000 1X RTT, IS-95 A/B
|
|
Bandwidth
|
Download speed:3.1Mbps, upload speed:1.8Mbps
|
|
TX power
|
<23dBm
|
|
RX sensitivity
|
<-104dBm
|
Hardware System
|
Item
|
Content
|
|
CPU
|
Industrial 16/32 bits CPU
|
|
FLASH
|
1MB(Extendable)
|
|
SRAM
|
512KB(Extendable)
|
Interface type
|
Item
|
Content
|
|
Serial
|
1 RS232 port and 1 RS485(orRS422) port, 15KV ESD
protection
Data bits: 5, 6 ,7, 8
Stop bits: 1, 1.5, 2
Parity: none, even, odd, space, mark
Baud rate: 110~230400 bps
|
|
Indicator
|
“Power”, “ACT”, "Online”
|
|
Antenna
|
Standard SMA female interface, 50 ohm, lighting
protection(optional)
|
|
SIM/UIM
|
Standard user card interface, support 1.8V/3V SIM/UIM
card, 15KV ESD protection
|
|
Power
|
Standard 3-PIN power jack, reverse-voltage and over
voltage protection
|
|
|
Power supply
|
Item
|
Content
|
|
Standard Power
|
DC 12V/0.5A
|
|
Power range
|
DC 5~35V
|
|
Consumption
|
<250mA (12V)
|
Physical
Characteristics
|
Item
|
Content
|
|
Housing
|
Iron, providing IP30 protection
|
|
Dimensions
|
91x58.5x22 mm
|
|
Weight
|
205g
|
Environmental
Limits
|
Item
|
Content
|
|
Operating Temperature
|
-25~+65ºC (-13~+149℉)
|
|
Extended Operating
Temperature
|
-30~+75ºC (-22~+167℉)
|
|
Storage Temperature
|
-40~+85ºC (-40~+185℉)
|
|
Operating Humidity
|
95% ( unfreezing)
|
